October 13, 2023
Description
Scare your trick or treaters this Halloween with a good old spider decoration!
Two 3MF files containing a spider with a hanging loop and the other without.
If you enjoy these models, you'll make my day if you buy me a cuppa tea.
Print Settings in 3MF
0.15mm
15% Infill
Print time: 1 Hour 50 Minutes (0.15mm)
1 Hour 26 Minutes (0.2mm)
The PLA settings in the 3MF are based on Zirro Glow in the Dark Green PLA. Please change your retraction and temperature settings accordingly.
Lee - Printo
License:
Creative Commons — Attribution — Noncommercial
7
Printo
