K-Cup Dispenser Wall Mounted

I didn't like the k-cup dispensers currently on Printables, so I made my own. I designed these specifically for clear filament. I used overture clear and inland clear, both worked great. The one on the left in the images is a prototype, which is why it looks a bit bad. On the very right was the dispenser I used to use from Dschwick, while I liked how light it was and simple to make, the cups would sometimes clip the support bars and get stuck. With my design, you still are able to see all the cups, and they are less likely to get stuck when sliding down. To mount to the wall, I used 3m double-sided adhesive tape like this or this.

When Printing

The thickness of the wall is .84mm, on a .4mm nozzle I set external perimeters to .42 and got good results.

Set min perimeters to 1 for the best results, otherwise there is some weird bulging where the semicircle transitions to the rest of the model.

Update 10/21/2024:

Added Models for CR-10 or Similar Printers