Bunny clock for easter

Hi all,

I designed a new clock inspired by one of my daughters. My daughter of six loves bunnies and because we are almost Easter, it's a good time for this design. (that's alsos my entrie for the easter contest)

You can print the bunny in different ways, you don't need a AMS, cause the colors can be changed at layer height.

Filament change at layer 95 for the mouth, eyes (big parts of the eyes) and the side.

Filament change at layer 100 back to white

Offcourse you can choose the colors that you love.

The model can be printed in different ways, you can print it with closed top layer or with an open top layer… see instructions if you ar not using the profiles

Clock mechanism i used: Amazon

But should work with KIT 011 from Bambu Lab

Instruction for closed top layer: Just print like you are used to, enable supports and slecht you filament swaps at the correct layers.

Instruction for the open top layer:

• In global tab choose the honeycomb infill en enable supports
• Go the the object tab; i used the Height range modifier (Right click on the object in the object tab)

That way the eyes and mouth will also be closed

• Set the layes you want to change; in this case it's 17.40 to 18.60 mm

• In the object tab set top layers to 0 and infill to honeycomb

Dont forget to do the color swaps :)

Slice and print =)

Have fun printing, and don't hesitate to share your makes.

Also go check my other models.