XY Leveling Gears for the Instant Platform Adjuster

This Thing is a gear (I printed four at a time using Skeinforge's multiply - 2x2 array) for placing over the middle nut suggested in Peacefrog's Instant Platform Adjuster.

With a gear over each middle nut, it was a breeze to level out my build platform.

Print instructions

Category: 3D Printer Accessories Instructions

1. Print 4x XY leveling gears.
2. Install the bolt upside down in the wooden support platform.
3. Tighten bolt down with one nut.
4. Place another nut over the first.
5. Place an XY leveling gear over the second nut.
6. Repeat for other three corners.
7. Replace the build surface.
8. Install build platform and dial the gears to the proper levels.
9. Place a nut on top of each exposed bolt.