Lenovo Tiny CX354A PCIe Bracket

This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards)

⚙ Features

• Vent holes on the right side that match the side vents of the Lenovo Tiny PC
• Bracket is secured to the card with the factory screws
• USB cable notch version for those using USB powered fans

🖨 Print Settings

• .12mm - 16mm layer height
• PLA+ or PETG
• Tree Supports

🔧 Install

1. [Removed old info]  Updated model now has the LED access port!
2. Install your CX354A into the Tiny PC without any brackets attached
3. Line up your newly printed bracket to all of the four mounting holes
4. Take the screws that held the factory CX354A bracket and install them to your card and new bracket, they will self tap into the plastic, don't make it too tight or it will strip the plastic threads
5. Install the other two screws lightly before they are snug, then snug up the screw on the right side (side with the vents/USB slot), then tighten the screw on the left

❄ Fan Shroud

Works well with my fan shroud design! Keep your blazing fast card cool!

https://www.printables.com/model/561920-lenovo-tiny-fan-shroud