Spider Man

★·.··.·★   👋 Hello😁   ★·.··.·★

Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better

🧡PRINTABLES→ COLLECTIONS 💚MAKERWORLD→ COLLECTIONS

If you want to print it as big as in the photo is there are already the cut out split files, just go to the bamboo slicer or Prusa and cut them into equal parts and then join them with glue ✂

This project includes:

  1. The original file named with "NORMAL"→ (with a thickness of 2mm)
  2. The original file with the hole for the wall named “NORMAL WITH HOLES”

  3. The file from me remixed with background to make it of different colors named "REMIX WITH BACKGROUND" →(with background thickness of 1.6mm and top design 0.4mm)
  4. Equal to the previous but with also the holes named  “REMIX WITH BACKGROUND AND HOLES”

  5.For those who do not have a multicolor printer, the secondary colors are raised by 0.4mm to change the filament to the layer named ““REMIX WITH BACKGROUND MIX”

The file number 5 and also on the plate number 5 of the file on bambustudio is more velute because the colors are divided on different layers and not on the same layer so for those who do not want the last layer smooth but a little 3d is perfect (RECOMMENDED)

COLLECTION WITH PROJECTS LIKE THIS RUN TO SEE AND PRINT THEM ALL

→ COLLECTIONS 

⚠→for a smooth or rough visual effect on the second plate, I recommend to print it to put in the slicer the part that is seen on the printing surface

❗In this remix has been added the bottom to make the print colorful comee a picture and in another remix have also been added holes for those who want to hang it on the wall without sticker❗