Manfrotto Quick Release Plate Riser for Analog Sky Ember

This is a 10mm riser for Manfrotto quick release plates for use with Analog Sky Sunny/Ember. 

There are two versions, one that uses short ¼-20 heat inserts and the other screws directly into the plastic. 

Printing and Assembly notes

Directions and notes on assembly

502AH Riser v0.1

• Screw a ¼-20 into the plastic before mounting it onto the quick plate. 
• Carefully screw the riser into place and do not overtorque the screws, otherwise it will strip out the plastic.

 502AH Riser Heat Inserts v0.1

• Use ¼-20 Heat Inserts such as https://www.amazon.com/dp/B08PVQX853
  • Dimensions are 7.64mm long and tapered from 9.55mm to 8.99mm 
• Heat inserts are immensely more durable than screwing into plastic, but you can still Jeremy Clarkson them if you apply too much torque.

Printing Parameters

• 3-5 perimeters
• 3-5 Top/Bottom layers
• 50% Gyroid infill

If one wants to be fancy, do 100% infill around the heat insert holes using a print modifier.