March 30, 2024
Description
Please read the text below before printing
The model is printed in pla black and silk gold.
You may have some problem printing and placing the letter. To avoid it print them slow and if reqired using a flow rate of 80%. If needed its also possible set horizontal expansion at -0.2/-0.3
If you will have trouble also with this metod the resolution can be found in a lighter.
Heat the piece
Push the letter but not too strongh.
BE CAREFUL! THE INSIDE OF THE LID MAY BECOME SOFT!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Maker_Sem
