Surface Go Wall Mount Case

wall-mount for a surface go. I used this to make a Home Assistant terminal.

Printing:

I used PLA at 20% infill. you should not need any supports

Assembly:

you will need 4 M3 threaded inserts, 4 M3X16mm screws, and some way of attaching it to the wall (I used drywall anchors). 

First insert the threaded inserts. Next attach the backplate to the wall (I only used the top 2 anchors). Next align the front plate and screw in the bottom 2 M3 screws. Next insert the surface into the top slot. Next screw in the top two M3 screws.