MK4 Side purge remix

Please excuse my crude Fusion360 skills, lol. I made the “Right Spacer” shorter for clearance and the “Holder” larger to fit. opened the holes to 10mm. extended the trigger out and up. you may or may not need a screw. The bucket is the same. Print it like the orientation, and everything fits perfectly. I printed with 100% infill and .2 layer height. Also, wrap the bucket in something that the filament wont stick to. Use a rubber band or spring for tension.

You do lose 5mm of X-axis. The MK4 is all proportioned differently and this was the best I could do. But NO PURGE BLOCK needed! Which means if you don't have a color change until layer 72 or so, you don't need to keep building the block for level 72. Huge savings in filament. and space!! 

Heres a Link To a quick video showing it working. 

SUPPORTS:

Holder : supports everywhere
Spacer: supports from build plate only
Trigger: no supports
Bucket: supports from build plate only

Here is the start gcode I use for this side purge and P2PP for Prusaslicer to work with my Palette 2s setup. 

;Palette 2 Configuration
;P2PP PRINTERPROFILE=(insert your printer profile here)

;P2PP BEDORIGINX=0
;P2PP BEDORIGINY=-5
;P2PP BEDSIZEX=245
;P2PP BEDSIZEY=215
;P2PP AUTOADDPURGE=100
;P2PP SPLICEOFFSET=30
;P2PP MINSTARTSPLICE=100
;P2PP MINSPLICE=70
;P2PP EXTRAENDFILAMENT=150
;P2PP LINEARPING
;P2PP LINEARPINGLENGTH=350
;P2PP PURGETOSPEED=3000
:P2PP WIPEFEEDRATE=3000

;P2PP MATERIAL_DEFAULT_0_0_0
;P2PP MATERIAL_PVA_PVA_0_0_0
;P2PP MATERIAL_PLA_PLA_0_0_0
;P2PP MATERIAL_PET_PET_0_0_-3
;P2PP MATERIAL_TPU_TPU_2_4_3

;P2PP CONFIGEND

; Following settings are optional (see description below)

;P2PP BIGBRAIN3D_COOLINGTIME=3
;P2PP BIGBRAIN3D_PURGEPOSITION=252
;P2PP BIGBRAIN3D_MOTORPOWER_HIGH=450
;P2PP BIGBRAIN3D_MOTORPOWER_NORMAL=300
;P2PP BIGBRAIN3D_FAN_OFF_DELAY=1000
;P2PP BIGBRAIN3D_ENABLE
;P2PP BIGBRAIN3D_PRIME_BLOBS=0
;P2PP BIGBRAIN3D_CLEARANCE_MM=40
;P2PP BIGBRAIN3D_SINGLEBLOB
;P2PP BIGBRAIN3D_BLOBSPEED=150