Adjustable graphic card support bracket LED light

• Video card support with LED lighting.
• Can be assembled in up to 5 colours due to the separate parts.
• The "window" is printed in transparent material on the front.
• Designed with a rubber disc for the bottom.
• The LED strip can be fixed to the inside with a double-sided adhesive strip.
• The rod can be snapped together, it does not need to be glued together, but it must be glued to the base.
• There are two versions of the horizontal adjustable bracket, please see the last picture.
• The rod can be used as you like with the led strip going in at the top or the bottom depending on how you rotate.
• 14-15 cm LED strip is enough. Plus wire tot he motheroard.
• For the horizontal support it is recommended to allow the support because of the hole, otherwise it is not necessary.
• PETG is recommended, PLA is not

If you like it, please give it a like and a drop a review if you printed it.

Thanks for your support!