Sander holder

I designed an sander holder Ø 125 mm for the wall. We will use M4x20 screws for connecting. The top side part is assembly on the back part. Then left side and right side part are mounted on the back part. The wall holder is attached to the sander holder using M4x20 screws and M4 nuts. Then insert the drawer parts into the sander holder at an angle 45°. The counter piece of the holder is installed on the wall using 4x30 wood screws, which you can find here: Board holder for storage tools.

Printing instructions for holder:

• filament PLA
• 0,2 mm layer height
• without supports
• infill 20%  

Link for other tool holders:

• Makita drill, screwdriver, multitool and 18V Battery holder 
• Clamp wall holder for Bessey GearKlamp
• Angle grinder holder
• Screwdriver holder
• Pliers holder
• Hammers holder
• Wrench holder

________________________________________________________________________________________________________________ 

If you want to support my other projects, you would contribute to filaments at PayPal. Thanks.