King of the Hill Hank Magnet (multi-color)(8x3mm magnets)

Pictured Example printed on a BambuLab X1C (Textured PEI)

Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). Additional coloring was added manually with the paint bucket and other tools.

8x3 Magnets to be glued in (magnet strip can be used instead)

Hope you enjoy!

(see my profile for other multi-color prints, as well as face-up manual color print designs if you don't have a multi-material option)