IKEA PAX Organizer System for changing table and else

This is a IKEA Pax system for different purposes. I use it for my toddler changing table. 

It allows you to dry your towel and hang different containers on it. 

I have designed 2 mounting versions, one with short mounts that are closer to the wall and one that has more distance (towel hanging). 

The bar comes with a heavy duty version with 3 mounting brackets and one with just 2, for uses with less weight on it. The female bar is always the same.

The bars should be printed with support (best manuel support for the bottom of the brackets and the male bar connector). They should be placed on the slimer site, to gain maximum stability for the brackets. Infill 60-80 %. Resolution 0,2. Brims could also be very helpfull if you  have wraping issues.

The pax mounts can be printed without support. 

At the moment I have a container for small trash bag roles and one for water to clean the toddler. The containers will need support to print for the mounting clamp. For the water container I recommend 3-4 solid walllayers so it is watertight.

It should be fairly easy to design additional hanging containers for the system, just use a distance of 12 mm for the bar.

You will need mounting screws from IKEA or elsewhere with the dimensions 6,3 x 16 mm.

I did use these https://www.amazon.de/dp/B08YS2X2FC 

If you want to know how to build a changing table into a pax, look here:

https://www.printables.com/model/738162-ikea-pax-heavy-duty-angle-schwerlast-winkel-fur-ik

I am always happy if people share their makes.