April 2, 2024
Description
Portable ro filter.
Should fit most 50mm and 60mm filters.
I used this one.
All parts are pre-orientated and most of them can be printed without support with the exception of tubehook, this part needs a small amount of support.
Pass through holes are made for 1/4" tubes.
Some parts have multiple configuration
Parts needed(as shown)
2040 alluminium extrusions
370mm x2
100mm x2
Allumium tube
120x11mm
Bolts(hex)
M2x10
M3x8
M5x10
M5x16
M6x16 (depending on extrusion tap size)
T-nuts
M3-2020
Heatset insert
M2x3
M3x5x4
M5x5.8
Couplings
3/4" to 3/4" connector
3/4" garden hose connector
3/4" to 1/4" connector (should come with filter)
License:
Creative Commons — Attribution — Noncommercial — Share Alike