October 25, 2021
Description
Wall-mounted filament spool holder. Fixed to wall/furniture with two screws/bolts.
Print settings:
Print the parts separately and assemble them together. Depending on your printer tolerances they may need some grinding to fit or a bit of glue to hold securely. Use some more perimeters and infill to ensure sufficient strength.
The bar may require a smaller layer height to make the top curvature smooth enough to provide easy rolling of the spool. Alternatively you may use some sanding paper to smooth it out after printing.
I printed mine with PLA and it holds 1kg spools without any issues so far. For heavier spools I would consider using PET-G however.
Category: 3D Printer AccessoriesLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Bemko
