Logitech Brio mount for LG OLED

I printed @ebi_178380's design and the angle wasn't right for my usage as the top of my head was about the middle of the camera feed.  I completely remade the model in fusion 360 and adjusted the angle so that the top of my head is about 80% of the way up the feed which makes for a much better experience in online meetings.  I also tightened the tolerance a small amount on the screen and there is still a little extra room.

The camera mount took a fair amount of pressure to snap in, but it's pretty solid once in.  If it is too tight, you might need to file it just a bit before inserting (I thought I might need to file, but just as that thought crossed my mind it snapped in :)

Original design idea goes to @ebi_178380.  I used his part to model mine which saved time in the modeling process.  I've included the stl and the fusion 360 file.  I hope someone finds it useful!  If you want to change the angle, find the triangle sketch in the fusion 360 timeline and edit it to your liking.  The picture and a short gif in the photos section should help you find it.

I printed it in black amazon basics PETG with 0.3mm layer height on a 0.6mm nozzle with 15% infill without supports or brim.