Stone Town Well

This stone town well is printed in 4 parts. If you print the posts in the oriented position, they should be a pretty tight fit with the stone well part. You may need a little sandpaper if they are too tight. If they are too loose, a little glue will help. The canopy has small notches where the posts go. You will be able to lift it off, but I got mine to stick with a bit of glue.

I've provided a version with the posts attached to the stone part if you want to do a filament change. Supports are optional on that one, but there is some bridging. If you are a total rebel, there is also a full version that will require supports.

If you need the posts done with different tolerances, please let me know and I'll get right on it.

Let me know what you think of it or if there is anything I could improve. I look forward to seeing some makes!