IKEA MILSBO flat feet

This is a drop in replacement for your MILSBO displaay cabinet if you want it to sit flat on the floor or on a different raiser/furniture.

I designed it do be easier to print in terms of supports, as one side (bottom) is completely flat. Nevertheless you will still need to support the housing holes for the M6 nuts.

Please be aware that when you assemble your MILSBO, you MUST use felt pads underneath to raise a bit the feet, otherwise they will not fit (see the picture). I used 5cm x 5cm pads.

The design requires 5 M6 nuts per feet (total 20 nuts) to be embedded (I used a soldering iron to ease them in).

I added the presupported version for Bambulab slicer.

Enjoy!