Round/gear helper for Gaslands, multicolor print.

I wanted an easy way to keep track of round and gear in Gaslands. I kept score with pen and paper for awhile. Then I made this. Printed with Prusa XL.

This is a multicolor print, this is not color change by layer, this can't be printed with single color printer.

I scaled the gear flaps to 1mm, they are 0.6mm and so are the round flaps. When scaling I got both piles same height. I should also had printed these face down, but I didn't think that until after printing and I didn't want to print them again. 

Holder part has holes through so you can put any rings you want, I made these for this from heavy wire but I have seen people using all kinds of keyrings and stuff. I glued the rings with epoxy so they are more stable but it was annoying to get them straight.

There's 10 rounds, we were thinking that if you go more rounds, just start with one again and remember how many ten's there is. Gears have 6 flaps. 

I wanted to use this this way, turning flaps from front to back, not other way round, but you can assemble it any way you want.