RAK Unify 150x100x45 enclosure plate 18650 battery bracket

This is a battery bracket for RAK Unify 150x100x45 enclosure plate. It allows you to fit 3 cell 18650 battery packs like the Adafruit 6600mAh 18650 pack.

Print settings I used on my MK4 with 0.4mm nozzle:

• Print in PETG or ASA if using in an outdoor enclosure as PLA may warp and deform!
• Start with 0.2mm QUALITY preset
• Make sure to place screw legs on plate (it may need to be flipped when imported)
• Set bottom solid layers to 5
• Set minimum perimeters to 3
• Set “Extra perimeters on overhangs” in profile settings to help with overhang floating anchors

CAD done in Onshape. You can view and copy the document here if you want to make your own changes.