Manfrotto 728B contact pads

I had a broken contact pad while replacing the clamp bodies on my Manfrotto 728B. I used Frubino's AWESOME replacement clamp bodies (Thingiverse 37672). I found that the smallest clamp body didn't clamp quite hard enough (I could still move it by hand with the stock pad).... so, here are 8 sizes of pads. The +0.25mm pad is what worked for me for my smallest clamp. The base clamp "should" be the same size as factory... but the + measurement is from datum, not a confirmed comparison to factory.

Recommend PETG and all perimeters (no infill). Suggest printing them upright... good luck that they all stay stuck to your bed!

Note: I marked these as a remix on Thingiverse so people printing Frubino's clamps would see them if they needed them.  They are my original work.