April 12, 2024
Description
I was unable to find a USB charger for the Svartpilen which had a nice fit ( not mounted visibly on the steering handle ), so i came up with a mounting solution where it sits just below the steering handle mounts in the center of the bike.
The location makes it almost invisible just looking at the bike, and it should'nt interfere with the steering.
Printed in PETG, 0.2 layerheight and 20% infill. PLA would also probably work just fine.
The USB charger is wired into the service connectors of the bike.
Parts used :
USB charger : https://www.aliexpress.com/item/1005006326980596.html?spm=a2g0o.order_list.order_list_main.5.76bd1802eTOCcS
Tesa ultra strong mounting tape : https://www.tesa.com/en/consumer/tesa-powerbond-double-sided-mounting-tape-ultra-strong.html
( for mounting the USB mount to the bike )
Some 3m tape ( could probably use the Tesa aswell ) for joing the usb with the usbmount.
Other strong double sided tapes will work just as fine.
If you print this please share a make of your result, and let me know if you have any issues.
License:
Creative Commons — Attribution — Noncommercial
9
Stig Woxholt
