October 26, 2021
Description
This is a mount I made for my Ikea Poang for DCS, its specifically made for the Logitech X56 or Saitek X55 HOTAS. You'll need two Brackets and 2 Mounts and some hardware listed below.
I've found you only need to use half of the mounting equipment listed in order to get a satisfactory experience with the bracket and mount. However should you want a more secure fit you can use all the nuts and bolts.
Please share your makes and reviews. If you found this useful considering dropping me a tip :)
Thank You
Hardware Requirements and Shopping List
Poang Bracket -> X55/56 Mount Connection: - 4-8 M5 Bolts 15-20mm length - 4-8 M5 nuts For the X55/X56 Mount: - 4-8 M4 60mm bolts - 4-8 M4 Bolts Shopping List (Amazon Links may break in future)
newlng M5 304 Stainless Steel Bolts and Nuts
https://www.amazon.com/gp/product/B07PRTBCWD/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&th=1
iExcel 50pcs M4
https://www.amazon.com/iExcell-Stainless-Socket-Button-Threaded/dp/B07QDYZDT1/ref=sr\_1\_8?dchild=1&keywords=m4+60mm+bolts&qid=1634531118&s=industrial&sr=1-8
binifiMux 40pcs m4
https://www.amazon.com/binifiMux-40pcs-0-7mm-Stainless-Inserted/dp/B075ZZD3NN/ref=pd\_bxgy\_1/143-5678131-9158936?pd\_rd\_w=1598C&pf\_rd\_p=c64372fa-c41c-422e-990d-9e034f73989b&pf\_rd\_r=GXWB6PE3RTQNZABBCF1R&pd\_rd\_r=fd8859dc-ad92-406b-a937-f7bdfcb84fae&pd\_rd\_wg=ms78S&pd\_rd\_i=B075ZZD3NN&psc=1
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.3
Infill:
10-15%
Notes:
Print the Poang Brackets 2 at a time vertically, depending on the filament you print them in you may have to clean up the screw holes with a hand drill. Should take 4-5 hours for 2 brackets.
For the X55/56 mounts I did my best to cut down on print time and filament used, I would recommend a 15% infill if your printing with a .6 or .8mm nozzle and 20 or 25% if your printing with a smaller nozzle. Each one should only take a couple hours with a .3 layer height.Thank You!
Category: Video GamesLicense:
Creative Commons — Attribution
Sawyer42
