3dset Bamboo rear leaf spring conversion

This is the first version of my leaf spring conversion for the 3dsets bamboo.  i modeled this of of the model 10 (hardtop) should work with the model 9 as well.  No promises that it will me a direct fit for the pick up or winch truck.  This is a work in progress and will be improved and updated.  

This will replace the rear 3 link, rear pan hard bar, and makes the rear shocks optional depending on desired suspension stiffness and how much infill you print the leafs with.  Ive started testing at 50% infill and feel its a solid starting point for use with no other rear spring or shocks.  Leaf springs are available for down load here https://www.printables.com/model/835558-leaf-spring-130mm

Currently you will have to remove the tail pipe section of the exhaust this will be fixed in a future update.

You will need about 12 20mm 3m screws few other assorted sizes i didn't keep track, im sure you will figure it out though its pretty straight forward if you go off the pictures below. videos of them in action can be found here  https://www.tiktok.com/@raisedbyllamas?_t=8lE1uOipCUE&_r=1