SCUBA diving bolt-snap hose holder / Schlauchhalter

Just a few simple hose holders for scuba diving. A normal bolt-snap eye or a D-Ring (5mm thickness) goes into the small hole, the holder then snaps onto the hose. The fit on the hose is tight enough to not come lose when you don't want them to, but they can be easily ripped off in an emergency or when entangled.

Give these to that one dive buddy that always has his hoses dangling everywhere or use them yourself if you are that guy. :)

hose_tool_lp fits most miflex and rubber low pressure hoses.
hose_tool_miflex_hp fits miflex high pressure hoses.

Printing instructions

• I recommend PETG or ASA
• Use 3-4 walls
• Use 5 top and bottom layers
• Use around 15-20% infill

I really like these bolt snaps (94mm variant).

Update 2024-09-14: Added six more variations to allow any combination of low pressure and (miflex-) high pressure hoses to be clipped together. With or without bolt snaps.

These do not comply with any standard such as EN250 or others, use at your own risk.