Spatula/scraper with blade (no glue, with blade clamp)

Big thanks to Ondřej Stříteský  this is a really good scraper. Added some minor features.

Parts can be screwed together with 2xM3 nuts and 2x M3x16 screws (14 or 20 should work too). 

Supports shouldn't be necessary but if you have problems with bridging you can use them on the hanger hole

There are 2 Versions

Without blade clamp

Assemble the two halfs and just insert the blade. I recommend securing this with a little bit of silicone

With blade clamp

Assemble the two halfs

IMPORTANT:Insert the blade first!!!!!!!!!  Push the blade until it covers at least half of the bore for the heatset inserts. 

Insert 2 M3x4 heatset inserts into the prepared holes (Designed for CNC Kitchen inserts)

Use 2 M3x6 button head srews and clamp the blade. For now I didn't use Loctite and it seems to work fine. Time will tell if this works out.

If you don't want the screws to stick out that far, you will need to sand them down to about 4.5mm. I personally will leave it as it is for now