Pwn-In-Place Pwnagotchi Case

19 Mar 25 - Added a new looped version that's much sturdier than previous models. Also changed the latch so the hinge was coaxial to the fillet. Overall, a more refined model than any of the previous iterations.

8 May 24 - Added beefy variants that have 2mm thicker ends and optimized latches to help with variances in builds. Also added revamped OG versions which have a deboss in the latch for build variance. 
 

10 Apr 24 - Added two variants for adding a carabiner or quick release of some sort. They are completely untested, so proceed at your own risk. As always, I'm not responsible for damage to your device(s) in the event your print breaks. However, I am always open to feedback on how to improve the design(s).

I wanted a Pwnagotchi case that latched/locked shut and I didn't see any that really called out to me, so I made one. 

Improvements are continuous, so if you have any comments about how it can be improved, don't hesitate to mention them. 

This is a quick and easy print. If you don't want to show the text, on the top, just make it the same color as the housing.

 Print Settings

• Material: PLA, PETG, ABS. ASA, PC, PA
• Layer Height: 0.16 or lower
• Infill: 40% or more
• Supports: Optional, not necessary

If you want the text to show properly

• Initial Layer Line Width: 0.25 (use Arachne)