Hex pattern top hat extender panels vor Voron 0.2

I used this cool mod to extend the height of the tophat of my Voron 0.2: https://www.printables.com/model/421883

But I did not want to order new panels, so I designed a printable extention. I added a light hex pattern for a nicer look. Also I used the panel to hide some leds.

You can print the extention in one color, but if you wanto to go fancy you can do a color change in between so the hexpattern is better visible.

Settings for printing with color change:

The panel is 3.2mm thick. Keep in mind that you might want to change the thickness based on how thick your acrylic panels are.

• Print with basecolor the layers from 0mm - 2mm (inlcuding the 2mm layer)
• Print with the accent color from 2.2mm to 2.8mm (including the 2.8mm layer)
• Print the last two layers from 3.0mm to 3.2mm in the base color again

It is best to print a few layers with the accent color, especially when you have a dark base color and a bright accent color, so the accent color will be vibrant. Otherwise some of the dark of the base color might shine through the lighter accent color and your accent color will not look as vibrant.