Poop Tower Game (purge escape - jenga style)

If you have a multicolor-printer generating lots of poop/purge/waste - then use some of it with this game! It’s is made to have fun with your Bambulab poops - enjoy!

The rules are simple: don’t drop the poop - but the game is hard to master.. Try it!

Overview

The game is all 3D-printed and consists of the following pieces:

• Tower
  • Tower base
  • Tower extension 1
  • Tower extension 2
  • Tower extension 3
  • Tower top
• Beams (lots of them!..)

Assembly

The Tower should be easily assembled - snaps together - and when not in use, it can be taken apart to save some space.

Rules

Setup for a round:

1. When the Tower is assembled, insert 4 beams in one of the top rows of the tower
2. Then you each take turn placing 1 Beam in the Tower until they are all placed (how many you want, is up to you - maybe start with a total of 20-30)

1. Fill purge/poop into the top of the tower - and then you are ready!

The game:

1. In turn, carefully pull 1 Beam out of the Tower (must be in a section/extension that contains poop!).
2. When a single purge/poop drops out at the bottom of the Tower in your turn - you loose the game/round!

Note: this is an all new game - if you have suggestions on improving the rules or the model, please leave a comment or contact me directly!

Warning: as in Jenga, every fast move or careless shaking with the table can ruin your chances of winning - so be careful!

Print instructions

All parts should be fairly easy to print. But here is a few tips:

• Brim: Maybe. It can help with bed adhession on the tower parts. Not needed on the Beams!
• Supports: NO supports needed

• Multicolor: The tower extensions can be imported into the slicer and Split into parts, to easily color the different segments.

Happy printing!