CZ: Veškeré návody k výrobě i použití v češtině naleznete na této stránce: https://3d.odkaznik.cz/sdrive-max
SDRIVE-MAX
This version of case is completely re-designed from scratch. When designing and selecting the hardware, I solved the following points:
- a familiar, yet unique box design,
- models for both 2.4" and 2.8" display sizes,
- correct positioning of the display - no hanging power cable or connectors, everything plugs in the back as usual,
- adding protective covers for the power connector and USB connector,
- a hole for the control stick to slide in, front and back,
- an opening for independent reset of the SDrive-MAX (2.4" version only),
- better mounting and dismounting (4 screws).
PRINT INSTRUCTIONS
The model is equipped with supports. After printing, these supports must be carefully removed.
- Rafts: No
- Supports: included
- Layer: 0,2
- Infill: 100 %
VIDEO
HARDWARE
The models fit this hardware:
2,8" display shield SPI 320x240, driver: ILI9341:
2,4" display shield SPI 320x240, driver: ILI9341 and Arduino Uno clone ("Bestduino" for SDrive-MAX)
Skovik
