April 9, 2024
Description
Print Settings:
Printer: Prusa MK3S+
Print Orientation for Optimal Strength: To be printed in a vertical orientation with the hole for the screw traveling horizontally through the part.
Filament: PETG
PETG tested and recommended for its potential watertight perimeters.
Layer Hight: 0.2
Infill: 5%-10%
Rectilinear
Exterior Perimeters: 3
Use staggered inner seams for improved watertight nature.
Brim: No
Heated Bed: Recommended
Supports: Yes
Use snug to fit inside screw hole, in vertical print orientation, and result in minimal waste.
Approximated Filament Usage: 1.35m
Approximated Print Time: 36 minutes.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
PealPrint
