Voron 2.4 Y Endstop Switch Holder

If you are using an umbillical or canbus that goes through the exhaust vent cover then this Y switch holder is for you! 

You will need -

1x Omron mouse button micro switch, I used the D2F-5L but you should be able to use any switch of the same size.

2x M2x10 self tapping screws to mount the switch

1x standard Mx10 to mount the holder to the motor drive frame

Print with standard Voron settings in ABS or ASA

West 3D link to switch used:

https://west3d.com/products/omron-mouse-button-micro-switch-d2f-01l?_pos=1&_sid=39194a641&_ss=r