April 10, 2024
Description
Remix of the famous “Rugged Box (Parametric)” by @Withy.
I made this box to accommodate the ANKER737 powerbank and some charging cables.
Changed the dimension accordingly and added the Logo on the lid as well as an Inset.
The Inset fits with very tight tolerances, therefore I added another version of it with a bit more clearance to the walls of the box.
INSTRUCTIONS:
The seal is optional (best printed in TPU).
For assembly there are 6 M3x30 Hex-Bolts needed.
They will be flush on the ends, if you want to use nuts use a sufficiently longer bolt :)
Printed on a Bambulab X1C with AMS.
Filaments used:
Happy Printing!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
CharliePapa
