May 3, 2024
Description
Spice rack for cabinet door or wall. Has a good amount of spring to it. I have printed it out of PETG and PLA with no real issues. Only 3 or 4 screws need installed, but plenty of holes for different arrangements. I only used 4 #8x3/4 screws. If metric I would use 4mm.
UPDATE: I have added two more versions (x4 and x6) for smaller printers. Also I took some measurements of our spices. We have containers that range from 42mm up to 47mm. All are held very well and secure. I hope this information helps when determining if it will work for you or need some scaling.
License:
Creative Commons — Attribution — Share Alike
AlmightyFireFly
