Workstand TorqKey and bit holder

This is a holder for a Prestacycle Mini TorqKey or Ritchey Torque Key preset torque tools. Hopefully it also fits the Prestacycle Pro version of the tool.

This mounts on the top 1-1/2" diameter stub of my ancient Ultimate Support workstand. It should also fit a Feedback Sports workstands, but please measure it first.

You can use the on-tool rubber bit holder and/or the bit spaces on the this part- they are deliberately loose so the bits can be removed easily without pulling the part off the workstand. The number of bits can be changed by changing the NumBits user parameter in the Fusion 360 model.

The three leaf springs on the side of the pictured part are a failed attempt to make the part hold onto the workstand better. It's easier to just add a bit of tape to the part ot make a tighter fit, but if you want those features, they are in the rolled back section of the model.

This build needs supports on the buildplate. As always, this is tuned to my 3D printer that makes inside features too small, so if the holes are the wrong size, you can change their dimensions in the model or just change the KludgeOffset user parameter.

The other part pictured is a larger, more general purpose tool holder- https://www.thingiverse.com/thing:6452190

Category: Tool Holders & Boxes