July 31, 2024
Description
I recommend 10 walls and 55% infill for this spool holder since it'll be carrying 5kg spools. It will almost certainly hold the weight with less structure than that, but I prefer it to be beefy.
Print this model laying flat with the legs and spool rod facing up.
The original had a .5" fillet on the back face that caused some stringing, I've reduced the radius to .1" to avoid that cosmetic issue.
Scaling to 101-102% might be recommended to keep the spool edges from lightly dragging on the feet of the spool holder.
License:
Creative Commons — Attribution — Noncommercial
7
Fraughst
