Mountain Mayhem field parts

Field Build Guide:
Check out the full build guide here

Printing the parts needed for this field will take about 2kg of filament. Producing the required parts will take several days, using multiple printers is recommended.

Filed CAD is accessible through OnShape

In order for the fasteners to correctly thread and bite into the 3d printed parts, low tolerance is required. Test screwing #6-32 fasteners into your first prints before producing too many parts. If the fit is too tight or too loose, look into adjusting your printer's XY Size Compensation setting.

PLA or PETG is recommended. 10% infill is acceptable for all parts except the boundary screws. For the screws, 40% infill or higher is recommended.

Total part quantities needed:
2 - boundary edge lower
2 - boundary edge upper
4 - boundary corner lower
4 - boundary corner upper
6 - boundary screw
4 - pass upper
4 - pass lower
2 - quarry A
2 - quarry B
4 - reservoir upper
4 - reservoir lower
4 - rock
30 - snow

Additional parts:
To complete the field you will need additional hardware like fabricated flat stock components,  fasteners, PVC pipes, and tape. Check out the build guide linked above to learn more.