KO II Shelf - Teenage Engineering EP-133

KO II Shelf - Teenage Engineering EP-133

Show off your beautiful KO II on this secure, wall mounted shelf. Prints without support in the provided orientation. Slot locks the KO II in position so it wont slip out. Attach to any surface with 4x #6 (~3.5 mm) screws. Recommend to print with more walls than usual for strength. 

Files

• .STL to print as is.
• .STEP to edit the CAD file if desired.

Print Settings

• Layer height = 0.2 mm
• Walls = 5
• Infill = 10%
• Support = NO

Assembly / Installation

No assembly, simply attach to wall with 4x #6 (~3.5 mm) screws.