The PET-Cyclator project builds on other machines for converting PET bottles into printing filament. The whole machine is controlled by Arduino (code attached). No special knowledge needed - Print,Plug&Play ;)
Parts needed:
Electronics:
12 V power supply (ideal power 120 W) (Power supply)
Arduino UNO
Stepper motor NEMA17
Driver for TB6600 stepper motors
LCD display 20x4 with I2C converter
Temperature K-probe with MAX6675 converter
PWM controller
12V heating element
Potentiometer B10K
Button
Fan 4010 (2x)
C14 plug with fuse
Noozle:
Heatblock E3D V6
E3D V6 nozzle (any diameter)
Fasteners and other materials:
L bracket 60x18x60 mm
M3x8 - 20 pieces
M3x14 - 20 pcs
M3x20 - 4 pcs
M3x50 - 8 pcs
M3 nuts - 30 pcs
M5x120 - 5 pcs
M5 mothers - 12 pcs
Wood screw 3x15 - 10 pcs
Bearing 625zz - 4 pcs
3mm plywood A4 size
Super glue
Double-sided adhesive tape
Printed parts
All parts in the Pulley and Body folder , if more than one of the same part, the nameXpcs is indicated, where X indicates the number of parts needed. Print parts from PET-G.
All parts can be printed on Prusa Mini
Assembly instructions are included in the files.
Code for Arduino in .ino format is also included.
Wiring diagram:
CS verze:
PET-Cyclator
Projekt PET-Cyclator navazuje na ostatní stroje na přeměnu PET lahví na tiskový filament. Celý stroj je řízen pomocí Arduina (kód přiložen). Bez potřeby speciálních znalostí - Print,Plug&Play ;)
Martin Tošer
