Mini Standup Sign - Single Sided

After I made the double sided standup sign, I realized the signs are a bit cumbersome to put away as you can’t fold them well. So I came up with this model which can be fully folded down.
The sign has only a single side for the text to show, but that is enough in most cases and even makes it easier if you want to write your own text in the slicer.

I have created many different ready to print STL files that already contain a text. Let me know if something is missing and I can add it.

Some Slicers also allow you to easily write your own text onto the signs, for that I have uploaded blank versions.

Adding a color change after 5.2mm is recommended to make the text stand out.

Printing Instructions

• Layer Height: 0.2 mm
• Infill: 15%
• Support: No
• Brim: No
• Color Change after 5.2 mm
• Good bed adhesion is needed, washing the print-sheet with warm water and soap always helps for me.

How to add your own text and a color change in Prusa Slicer 2.7.4:

Right click on the model, select Add part -> Text.

Write something, choose a font and customize it. Drag the text to the middle of the sign. Emboss the text with a height of 0.8mm.

Slice the file with a layer height of 0.2mm. Right click the plus sign at the layer height of 5.40 (the first layer where you see the text appearing) to add a color change. Done.

(The KEEP CALM version of this sign was inspired by Gael Lafond’s Mini Floor Stand. Thanks for providing the SVG file.)

Update May-21st, 2024:

• Uploaded blank files with larger clearances in the hinges. Use these if you have difficulties printing the regular files.
• Uploaded a sign with the text “ON A VIDEO CALL”