May 27, 2024
Description
The large sibling of my Potentiometer Knob with knurled surface for Potentiometers with 6mm round axle. The hollow 20mm diameter design covers the nut completely.
Prints well on an FDM printer with 0.2mm layer height. Print with shaft side downwards and use supports for the flat ring on the inner side. Ironing for the top surface is recommended for a nice finish. Use color change for the last layers (indicator line).
See also my Encoder Knob
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
mrusk
