Aquarium water surface filter (manual skimmer)

Hi all !

In aquariums with live plants, a layer of slimy protein forms on the surface of the water in the first few weeks after start-up. This is a natural process. It is the result of plant metabolism. Unfortunately, this is not a very pretty sight and also hinders the exchange of oxygen and carbon dioxide. Later, when the plants get stronger, it will disappear. There are many ways to remove it. Some people pick it up with paper. Some take it down with a glass. There are also electric extractors. There are those that need to be inserted into the suction branch of the external filter. For larger aquariums, the version with an electronic motor is a good solution. This cannot be done with smaller aquariums.You have to put a normal unscented cotton pad inside the 3D printed skimmer, in the middle and wrap the handle. The handle holds the cotton pad in place. When assembled, the valve goes down, which is held in place by the star. When the skimmer is pushed under the water, the valve closes at the bottom. When we take it out of the water, the valve opens. The water flows out through the cotton wool at the bottom. The slime sticks. If the disk becomes very saturated, the water flows very slowly. Then you have to replace it. I designed several types of skimmer heads for it. Who suits what better. Try it yourself. You can also use the skimmer by holding it in the air above the water and using a glass to suck up the slime and pour it into the skimmer. It requires support at one point. Under the middle of the handle.

If you find the 3D printed gadget useful, you can thank my work with a like and by sharing it with other friends who can use it. Thx !