Parametric Y Pipe or Hose Fitting

I decided to spend a bit of time to create the GOAT parametric Y adapter for pipe and hose.

This model is fully parameterized in the magic Fusion 360 WYSIWYG way. You can can open the model in Fusion 360 and simply double click on any neasurement show to modify. You don't even have to open the edit parameter dialog.

The diameters are the outside measurement so if you want to specify an inside diameter for one or more end you can enter your measurement followed by +thickness so for example if you want the bottom opening to be 3 inches ID you would enter 3”+thickness  You can specify any valid Fusion 360 units in the measurement expressions so 5”-2.125mm*2+1cm is a valid length.