Modular Enclosure for every 3D-Printer

I was searching for a moduluar Enclosure. Some of the designs i found looked really nice but they needed so much filament.

So i designed my own enclosure and i am really happy with it.

You need a lot of M3x12mm and 16mm screws with nuts.

10x2mm magnets for the door and a 50mm or longer M3 Screw for the hinge.

I used a 6mm Acrylglass sheets for the sides, top and backside.

For the door you need a 4mm sheet.

You can print the frame with some extra holes for some struts to get more stability, or mout some stuff on the struts (camera,…).

In my case i printed the enclosure with the holes for the struts but i didnt mounted them cause the enclosure was really stabil.

The handle on the door is not from me, found it here on printables.