Arch headphone stand

Arch:
PETG. 0.6 mm nozzle
Layer width: 0.7 mm
variable layer height ~ 0.15-0.30 mm (top and overhang: ≥0.15 mm)
fuzzy skin: contour, 0.3/0.3 mm
Mouse ears on the corners
walls: 2 layers
top/bottom: 4 layers
infill: 10% (in retrospect: denser infill would be better at the very top. I would add a modifier to the top 5-10 mm. Solid infill caused some scraping because the infill wasn't dense enough.)

Plugs:
TPU
0.4 mm nozzle
15% infill
3 walls
Print one, test clearance.
I also glued them in with CA.

Funnel:
PLA
vase mode

I used fish tank gravel as weight.