Bike Radar Mount for Magene (and Garmin Varia)

Print on the flat side. If you use the modifier you can print the part with 1 perimeter and very little infill. Printed mine in CF PETG but anything will work. 

To fix the mount screw a M3x20 (DIN 912) hand tight into the mount. Check if the mount is loose while tightening it. Once its fixed stop and DONT OVERTIGHTEN the screw. 

You need a Garmin insert. I took mine from an old bike computer mount.

 (haven't tested these: https://www.aliexpress.com/item/1005005134362313.html)