Two Way Sweep Tee Pipe or Hose Fitting

Fully parametric Fusion 360 CAD model “sweep tee” for pipe or hose. The parameters are all WYSIWYG visible and editable in design mode. Double click any callout in design mode to edit and update the model on enter. All three ends can be adjusted for diameter and length. 

The bottom inlet/outlet along with the two upper inlets/outlets are each independently adjustable in size/diameter and position. For names in the parameter editing dialog, “_height” is the distance from the origin, “_length” is the  is the length of the straight section where you connect your pip or hose. The side inlet/outlet has an angle and radius for the sweeping curve.

If you increase a diameter you may need to adjust the height.

Measurements are metric in millimeters but you can change the default units in Fusion 360 browser. You can enter inches in any length parameter using a double quote. 

Feel free to post your customized instances of this model on Printables with a remix reference.