Itachi Uchiha - Hueforge 3 color

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Nozzle: 0.4 mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.3
PLA Jayo Basic Red Transmission Distance: 2
PLA EL3D Jade White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Red
At layer #22 (1.84mm) swap to White for the rest.