FPV Drone Wall Hanger V2 (3M Command Strip)

Features

• Wall hanger for 2.5" or larger quads (check your dry weight vs single 3M Command strip max load)

• Uses a single 3M Command Strip - size M or smaller (Max. Dimensions: 70 x 20mm)

Changelog

• Removed logos and designed by

• Increased depth for drones with thicker arms

• Wider/taller retainer plates to hold the arms more securely

Print Settings

• Printer: Creality Ender 3

• Filament material: PLA

• Resolution: Default or finer

• Wall Ordering: Outside to Inside

• Supports: Yes

• Infill: >20%

• Infill Pattern: Hexagonal/Tri-Hexagonal

• Nozzle Temp: 220°C

• Bed Temp: 60°C

• Print Speed: 100mm/s

• Rafts: Doesn't Matter

• Notes: Depending on your first layer quality, some sanding and cleaning might be needed for better adhesion. After sanding, rinse and dry. Use any tape to stick off excess dust/particle before applying 3M Command Strip